Home
HS Progarmmable Brushless Controller 50A   $48.99       
Specifications:
Input Voltage: 13~25V
Output current: 50A: max current 55A, continuous current 50A for 10 minutes
BEC Output: 5V/3A
Dimensions: 50mm x 35mm x 8mm
Weight: 1.1 oz with connectors         
Set up Instruction:

  1. Connect the motor and receiver to the speed controller
  2. Move throttle stick on full power position (UP Position)
  3. Connect the battery to the speed controller.

You should hear the following sounds after 3 seconds. If there are no more sounds after a long Bee, try to revers the throttle
channel.

Step 1
  • Music + bee     Set Battery Type and Cells, it will repeat 3 times. Move the stick to middle position, see Step 2.
    Otherwise, keep waiting for next option.

  • Music + bee +bee     Set Brake, it will repeat 3 times. Move the stick to middle position, see Step 3. Otherwise, keep
    waiting for next option.

  • Music + bee + bee + bee     Set Timing Mode, it will repeat 3 times. Move the stick to middle position, see Step 4.
    Otherwise, keep waiting for next option.

  • Music + bee + bee + bee + bee     Set PWM, it will repeat 3 times. Move the stick to middle position, see Step 5.
    Otherwise, it will back to Music + bee.

Step 2 Set Battery Type and Cells/BEC   

  • Bee + zee     Set as Ni/Cd/MH battery, 0.8V/cell. It will repeat 3 times, if you want set as it, move the stick to the bottom
    position.  You will hear bee. Your are set for this step. If you want to set other functions, go back to Step 1. Otherwise,
    wait for next option.

  • Bee + zee + zee     Set as 4S Li-Po battery, 2.75V/cell. It will repeat 3 times, if you want set as it, move the stick to the
    bottom position. You will hear bee. Your are set for this step. If you want to set other functions, go back to Step 1.
    Otherwise, wait for next option.

  • Bee + zee + zee + zee     Set as 5S Li-Po battery, 2.75V/cell. It will repeat 3 times, if you want set as it, move the stick
    to the bottom position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the
    battery and go back to Step 1. Otherwise, it will back to Bee + zee.

  • Bee + zee + zee + zee + zee     Set as 6S Li-Po battery, 2.75V/cell. It will repeat 3 times, if you want set as it, move the
    stick to the bottom position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the
    battery and go back to Step 1. Otherwise, it will back to Bee + zee.

Step 3 Set Brake

  • Bee + Bee + zee     Set no brake. It will repeat 3 times, if you want set as it, move the stick to the bottom position. You
    will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1.
    Otherwise, wait for next option.

  • Bee + Bee + zee + zee    Set as Soft Brake. It will repeat 3 times, if you want set as it, move the stick to the bottom
    position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go
    back to Step 1. Otherwise, wait for next option.

  • Bee + Bee + zee + zee + zee   Set as Mid Brake. It will repeat 3 times, if you want set as it, move the stick to the
    bottom position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and
    go back to Step 1. Otherwise, wait for next option.

  • Bee + Bee + zee + zee +zee + zee    Set as Hard Brake. It will repeat 3 times, if you want set as it, move the stick to the
    bottom position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and
    go back to Step 1. Otherwise, it will back to Bee + Bee + zee.


Step 4 Set Timing Mode

  • Bee + Bee + Bee + zee     Set as 3º. It will repeat 3 times, if you want set as it, move the stick to the bottom position.
    You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step
    1. Otherwise, wait for next option.

  • Bee + Bee + Bee + zee + zee    Set as 8 º. It will repeat 3 times, if you want set as it, move the stick to the bottom
    position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go
    back to Step 1. Otherwise, wait for next option.

  • Bee + Bee + Bee + zee + zee + zee   Set as 15º. It will repeat 3 times, if you want set as it, move the stick to the bottom
    position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go
    back to Step 1. Otherwise, wait for next option.

  • Bee + Bee + Bee + zee + zee +zee + zee    Set as 30º. It will repeat 3 times, if you want set as it, move the stick to the
    bottom position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and
    go back to Step 1. Otherwise, it will back to Bee + Bee + Bee + zee.

Step 5 Set PVM

  • Bee + Bee + Bee + Bee + zee     Set as 8MHz. It will repeat 3 times, if you want set as it, move the stick to the bottom
    position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go
    back to Step 1. Otherwise, wait for next option.

  • Bee + Bee + Bee + Bee + zee + zee    Set as 16MHz. It will repeat 3 times, if you want set as it, move the stick to the
    bottom position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and
    go back to Step 1. Otherwise, wait for next option.

  • Bee + Bee + Bee + Bee + zee + zee + zee   Set as 32MHz. It will repeat 3 times, if you want set as it, move the stick to
    the bottom position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery
    and go back to Step 1. Otherwise, it will back to Bee + Bee + Bee + Bee + zee.