 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
HS Programmable Brushless Controller 20A $29.99
Specifications:
Input Voltage: Ni-CD/Ni-MH/6~14.4V or Li-Po 7.4~11.1V
Output current: 20A continuously Max 25A
Dimensions: 50mm x 23mm x 8mm
Weight: 0.9 oz with connectors
Input Voltage: Ni-CD/Ni-MH/6~14.4V or Li-Po 7.4~11.1V
Output current: 20A continuously Max 25A
Dimensions: 50mm x 23mm x 8mm
Weight: 0.9 oz with connectors
Instruction Manual
This brushless controller can be program by your radio transmitter. To program this controller is simple and straight forward.
Step 1
Connect the motor, receiver and the speed controller, but not the battery. Turn the transmitter on, push the control stick to the top position
(full throttle), then plug in the battery. You will hear the music, after about 1 second, you will hear music and bee.
Step 2 Set Battery Type and Cells
Step 3 Set Brake
Step 4 Set Timing Mode
Step 5 Set BEC Voltage
This brushless controller can be program by your radio transmitter. To program this controller is simple and straight forward.
Step 1
Connect the motor, receiver and the speed controller, but not the battery. Turn the transmitter on, push the control stick to the top position
(full throttle), then plug in the battery. You will hear the music, after about 1 second, you will hear music and bee.
- Music + bee Set Battery Type and Cells, it will repeat 3 times. Move the stick to middle position, see Step 2. Otherwise, keep
waiting for next option.
- Music + bee +bee Set Brake, it will repeat 3 times. Move the stick to middle position, see Step 3. Otherwise, keep waiting for
next option.
- Music + bee + bee + bee Set Timing Mode, it will repeat 3 times. Move the stick to middle position, see Step 4. Otherwise, keep
waiting for next option.
- Music + bee + bee + bee + bee Set BEC Voltage, it will repeat 3 times. Move the stick to middle position, see Step 5. Otherwise,
it will back to Music + bee.
Step 2 Set Battery Type and Cells
- Bee + zee Set as Ni/Cd/MH battery. It will repeat 3 times, if you want set as it, move the stick to the bottom position. You will
hear bee. Your are set for this step. If you want to set other functions, go back to Step 1. Otherwise, wait for next option.
- Bee + zee + zee Set as 2S Li-Po battery. It will repeat 3 times, if you want set as it, move the stick to the bottom position. You will
hear bee. Your are set for this step. If you want to set other functions, go back to Step 1. Otherwise, wait for next option.
- Bee + zee + zee + zee Set as 3S Li-Po battery. It will repeat 3 times, if you want set as it, move the stick to the bottom position.
You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise,
it will back to Bee + zee.
Step 3 Set Brake
- Bee + Bee + zee Set as no brake. It will repeat 3 times, if you want set as it, move the stick to the bottom position. You will hear
bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise, wait for next
option.
- Bee + Bee + zee + zee Set as Soft Brake. It will repeat 3 times, if you want set as it, move the stick to the bottom position. You
will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise,
wait for next option.
- Bee + Bee + zee + zee + zee Set as Mid Brake. It will repeat 3 times, if you want set as it, move the stick to the bottom position.
You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise,
wait for next option.
- Bee + Bee + zee + zee +zee + zee Set as Hard Brake. It will repeat 3 times, if you want set as it, move the stick to the bottom
position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1.
Otherwise, it will back to Bee + Bee + zee.
Step 4 Set Timing Mode
- Bee + Bee + Bee + zee Set as 2º. It will repeat 3 times, if you want set as it, move the stick to the bottom position. You will hear
bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise, wait for next
option.
- Bee + Bee + Bee + zee + zee Set as 7 º. It will repeat 3 times, if you want set as it, move the stick to the bottom position. You will
hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise, wait for
next option.
- Bee + Bee + Bee + zee + zee + zee Set as 15º. It will repeat 3 times, if you want set as it, move the stick to the bottom position.
You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise,
wait for next option.
- Bee + Bee + Bee + zee + zee +zee + zee Set as 30º. It will repeat 3 times, if you want set as it, move the stick to the bottom
position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1.
Otherwise, it will back to Bee + Bee + Bee + zee.
Step 5 Set BEC Voltage
- Bee + Bee + Bee + Bee + zee Set as 2.8V/cell. It will repeat 3 times, if you want set as it, move the stick to the bottom position.
You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1. Otherwise,
wait for next option.
- Bee + Bee + Bee + Bee + zee + zee Set as 2.9V/cell. It will repeat 3 times, if you want set as it, move the stick to the bottom
position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1.
Otherwise, wait for next option.
- Bee + Bee + Bee + Bee + zee + zee + zee Set as 3V/cell. It will repeat 3 times, if you want set as it, move the stick to the bottom
position. You will hear bee. Your are set for this step. If you want to set other functions, unplug the battery and go back to Step 1.
Otherwise, it will back to Bee + Bee + Bee + Bee + zee.
